MHZS180 Modular Concrete Batching Plant Project in Xinjiang

Project overview

The source document for the MHZS180 modular concrete batching plant prepared for Xinjiang, China lists a 150 m³/h project value and a 380 V, 50 Hz electrical supply. A plant in this production class requires continuous aggregate, cement, water and admixture supply. Actual output depends on the recipe and operating cycle.

Visible configuration

Photographs show multi-compartment aggregate bins, belt conveying, the mixing module, three tall vertical cement silos, screw conveyors and a control room. The main units are assembled on steel frames, while the aggregate batching section is positioned on a separate support structure.

Site conditions

The gallery shows the plant in an open, dry mountainous area. Project planning should consider wind and dust loads, winter temperatures, water-pipe freezing, aggregate moisture, lighting and maintenance access. Separate foundation and anchoring calculations are required for the cement silos.

Planning high-capacity production

The 150 m³/h value is the project figure recorded in the document, not a continuously measured result. Practical output depends on mixer cycle, concrete recipe, vehicle dispatch, aggregate and cement reserves and preventive maintenance. Daily demand and storage logistics are as important as the nominal hourly figure.

Source limits

The document does not provide the customer name, commissioning date or silo capacities. Photographs show the assembled or installation condition but do not verify measured output. The displayed 2026 date is the website publication year because the source does not identify the commissioning year.