HZS120 stationary concrete batching plant
HZS120 is a stationary wet-mix concrete batching plant for commercial ready-mix, road and bridge construction, industrial facilities and large residential projects. The approved reference configuration combines 120 m³/h theoretical capacity, a 2.0 m³ JS2000 twin-shaft forced-action mixer, four 25 m³ aggregate bins and an 800 t/h inclined belt conveyor.
Final silos, screw conveyors, environmental systems, climate equipment and electrical scope are selected for the project. Actual site output depends on the recipe, mixing time, material supply and dispatch cycle.
Overview
Product overview
HZS120 is a fixed-layout wet-mix plant built around a JS2000 twin-shaft mixer with 2,000 L nominal output per batch and two 37 kW mixing motors. The approved reference production cycle is 60 seconds.
Aggregate system
Four 25 m³ bins store four aggregate fractions. A 3,200 L batching unit weighs aggregate and an inclined belt conveyor rated at 800 t/h transfers material to the mixer. The approved maximum aggregate size is 80 mm.
Weighing systems
The reference aggregate scale handles up to 3,500 kg at ±2%. Cement is listed up to 1,200 kg, mineral powder up to 800 kg, water up to 600 kg and admixture up to 50 kg, each at ±1% in the approved configuration. These figures require correct calibration and stable feeding.
Powder storage and conveying
Silo capacity is project-specific; the approved reference describes up to 4 × 200 t. Screw-conveyor capacity is listed at 80 t/h. The final number, length, angle and size of screws must match the silo layout and scale demand.
Control system
Central automatic control coordinates batching, weighing, transfer, mixing and discharge. Recipes, reports, alarms, access permissions, moisture correction and remote functions depend on the ordered automation package.
Reference power and site data
The approved reference total power is 210 kW and the recommended supply is 380 V, 50 Hz, three phase. Final power must include the selected silos, screws, compressor and optional environmental or climate equipment.
Standard and optional scope
The plant structure, aggregate system, JS2000 mixer, dosing circuits and control system form the core scope. Silos, screws, dust collection, full enclosure, heating, cooling, recycling equipment, generator and spare parts are project-specific unless listed.
Site and maintenance
Confirm foundation loads, ground conditions, loader and truck routes, utilities, drainage and maintenance access. Service mixer wear parts and seals, lubrication, conveyor tracking, bin gates, load cells, pneumatic devices, pumps and electrical terminals; recalibrate scales after mechanical work.
Capacity note
120 m³/h is theoretical capacity. Sustained output varies with recipe, approved mixing time, moisture, material replenishment, discharge, truck logistics and maintenance.
Quotation inputs
Provide average and peak demand, concrete grades, aggregate fractions and size, daily schedule, site plan, utilities, climate, silo reserve, environmental requirements and commissioning date.
Related products
Articles about this equipment
Recommended products
Cannot find the product you need?
Leave your phone number and our specialist will call you back and recommend the right product.